Connect with us

Headlines

Comrade Muktar Yakubu pleads for patience over ongoing review of staff salary at Nigerian Shippers’ Council 

Gloria Odion, Maritime reporter 
The President of the Senior Staff Association of the Nigerian Shippers’ Council (NSC), Comrade Muktar Yakubu, has asked the staff of the Council to be patient with the management over the delay in adjustment of their salary, revealing that the process is ongoing and awaiting the approval of the appropriate authority.
The labour leader make this clarification following the apparent agitation of staff over the delayed adjustment in their salaries and emoluments.
It would be recalled that the Executive Secretary of the NSC, Pius Akutah, during the 2026 strategic management retreat of the council held in Abeokuta, Ogun state between March,4th – 7th, 2026, had revealed plans by the management to push for the salary review of staff.
However, Comrade Muktar Yakubu said the process had already begun, praising the commitment of Pius Akutah- led management in this regard.
He however clarified that the ongoing salary review within the Council is still undergoing official government processes and has not yet been approved for implementation.
Speaking on the development, Yakubu explained that the exercise is strictly guided by established public service procedures, stressing that salary reviews in federal agencies require multiple layers of approval before they can take effect.
Explaining the procedure, the labour leader said the Nigerian Shippers’ Council initiated the process through the Federal Ministry of Marine and Blue Economy, which serves as its supervising ministry.
Comrade Yakubu noted that once the ministry gave its approval, the proposal was forwarded to the National Salaries, Incomes and Wages Commission (NSIWC) for further statutory consideration, in collaboration with the Budget Office of the Federation and other relevant authorities.
He emphasized that while the proposal has already reached the NSIWC and necessary clarifications were provided when requested, final approval is still being awaited.
Yakubu stressed that no implementation can commence until the Commission gives its formal consent.
He also clarified that ministry’s approval does not translate into immediate salary adjustments, adding that the NSIWC remains the final authority responsible for approving remuneration structures in federal agencies.
Speaking further on the role of management, Yakubu commended the Executive Secretary of the Council for initiating the process and supporting the establishment of a salary committee tasked with reviewing the Council’s financial position and developing a new salary framework.
He noted that the committee’s recommendations were approved internally before being forwarded through the appropriate channels.
Addressing concerns about staff welfare, the union leader said it would be inaccurate to describe the workforce as generally dissatisfied, noting that while individual concerns exist, the Council continues to make efforts within its available resources to improve staff conditions.
He added that staff welfare remains a priority for the union, but must be considered within the financial realities and operational capacity of the organisation, stressing that comparisons with other agencies should take into account differences in budgetary allocations and mandates.
Yakubu further stated that management has already implemented several welfare initiatives and continues to demonstrate commitment to improving staff conditions where possible.
He urged staff to remain patient, reiterating that the salary review process is progressing through due process and that final approval from the NSIWC is the last stage before implementation can begin.
He expressed optimism that once the process is concluded, staff would begin to benefit from the new salary structure alongside other ongoing welfare improvements within the Council.
Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Analyses

The National Single Window Illusion: Why phase two cannot succeed on paper

Monday Discourse with Nasiru Ibrahim

The official rollout of Phase One of the National Single Window (NSW) was heralded as a monumental leap toward a paperless, automated trade ecosystem.

On paper and within executive dashboards, the achievements are clear: the serialization of Licenses, Certificates, and Permits (LCPO), streamlined electronic manifest transmissions, and integrated risk management for primary regulators like SON and NAFDAC.

Yet, as the steering committee aggressively prepares for the imminent deployment of Phase Two, a severe operational reality check is required.

The claim that the Single Window has successfully “taken off” remains a purely administrative illusion when measured against the brutal, manual friction remaining at our terminal gates.

The core vulnerability of the current transition is the absolute failure to align digital front-end clearances with physical back-end enforcement.

Importers are successfully navigating the centralized National Single Window Portal, obtaining official electronic green lights, only to watch their consignments get trapped by manual human greed the moment the cargo hits the access roads.

Phase Two promises end-to-end electronic customs clearance, full payment digitization, and automated interoperability with the Nigeria Customs Service’s new B’Odogwu Unified Customs Management System.

However, if the federal administration continues to pour billions into software updates while leaving parallel manual check-points unpunished, Phase Two will simply become a highly expensive digital facade masking an archaic extortion regime.

True trade facilitation is not a technological achievement; it is a direct function of political will.

The integration of advanced platforms like B’Odogwu across major commands like Apapa and Tin Can proves that our regulatory arms possess the technical capability to automate. The problem is cultural and financial.

Entrenched administrative empires are deliberately preserving parallel manual structures because documentation loops, artificial delays, and manufactured compliance flags remain incredibly lucrative.

For the National Single Window to transition from a policy delusion into a genuine economic catalyst, the state must move past cosmetic celebrations.

The presidency must deploy the executive power required to completely outlaw physical interventions outside the approved digital framework and enforce severe punitive consequences for any agency chief who authorizes parallel verification processes.

Until the gate complies with the portal, the National Single Window project remains grounded.

Chief Ibrahim Nasiru, a public affairs analyst, writes from Abuja

Continue Reading

Customs

Customs’ reforms, modernisation project excite Senate 

Gloria Odion, Maritme reporter

The Senate Committee on Customs and Excise has commended the far-reaching reforms being implemented by the Comptroller-General of the Nigeria Customs Service (NCS), Adewale Adeniyi, describing them as evidence of prudent investment of government resources to reposition the Service for greater efficiency, transparency and improved service delivery.

The commendation came on Thursday, August 6, 2026, during a two-day retreat organised by the NCS in collaboration with the Senate Committee on Customs and Excise to strengthen legislative oversight and review the Nigeria Customs Service Act.

As part of the retreat, members of the Committee toured the Customs House in Maitama, Abuja, where they were briefed on the Service’s ongoing modernisation programmes, technology-driven operations and institutional reforms.

Speaking after the tour, Chairman of the Senate Committee on Customs and Excise, Senator Isah Jibrin, said the visit offered lawmakers an opportunity to witness first-hand the transformation taking place within the NCS.

“We have heard about these reforms from afar, but today we have seen them ourselves.

“The transformation taking place in the NCS is remarkable, particularly in the deployment of technology, modern infrastructure and operational innovations that are repositioning the Service for greater efficiency,” he said.

Jibrin said the retreat had also enabled members of the Committee to gain a clearer understanding of how appropriated funds were being utilised by the Customs Service.

“When the NCS comes before the National Assembly seeking approval for capital expenditure, we now have a clearer understanding of what those resources are being used for.

“The reforms we have seen today clearly demonstrate that government funds are being invested responsibly to strengthen Customs operations, improve trade facilitation and enhance national revenue,” he stated.

Responding, the Comptroller-General of Customs, Adewale Adeniyi, attributed the progress recorded by the Service to the deliberate deployment of technology across various aspects of Customs administration and operations.

He said technology had become central to the NCS strategy for improving efficiency, transparency and service delivery.

“Technology helps us to work faster and more efficiently. We started by deploying digital solutions into personnel administration, postings, staff matters and pensions before extending them to our core operational responsibilities, and we will continue until virtually every aspect of Customs operations is technology-driven,” Adeniyi said.

The Customs chief also highlighted the deployment of advanced technology in the Service’s enforcement operations, including virtual shooting simulators, geospatial intelligence and digital surveillance systems.

“We are deploying geospatial intelligence to map our patrol routes and position our checkpoints more efficiently across the country.

“Combined with modern training facilities such as our virtual shooting range, these innovations will significantly strengthen our enforcement capabilities,” he explained.

Adeniyi further disclosed that several of the Service’s modernisation initiatives were backed by provisions of the Nigeria Customs Service Act, stressing that the NCS remained committed to implementing reforms that align its operations with the Federal Government’s broader economic agenda.

“The law requires us to modernise our operations. Initiatives such as the Authorised Economic Operator Programme, Advance Ruling, Time Release Study, scanner deployment and other technology-driven reforms are all backed by the provisions of the Nigeria Customs Service Act.

“Our responsibility is to continue implementing them to support the Federal Government’s reform agenda,” he said.

The Senate Committee’s commendation is expected to further strengthen legislative support for the NCS modernisation programme as the Service intensifies efforts to leverage technology, strengthen enforcement, facilitate legitimate trade and boost revenue generation.

The retreat also provided an avenue for lawmakers and Customs management to deepen their understanding of the operational realities of modern Customs administration and the legislative framework required to sustain ongoing reforms.

Continue Reading

Analyses

The National Single Window illusion: Why phase two is dead on arrival

Chief Nasiru Ibrahim

Tomorrow on Monday Discourse with Nasiru Ibrahim,  I am dropping part three of my maritime audit, ‘The Single Window Illusion: Why Phase Two is Already Grounded.

For months, our regulatory class has hidden behind the glossy public relations of automated portals, celebrating the ‘take-off’ of Phase One.

But a cold look at the raw data reveals a terrifying truth: we are running a digitised facade over a broken, manual rent-seeking ecosystem.

Tomorrow , I shall be  exposing the massive operational disconnect between the new B’Odogwu Customs System and the brutal, manual greed at the terminal gates.

You cannot claim to master trade velocity when parallel checkpoints, erratic human intervention, and bridge shakedowns are hardcoded into the Apapa corridor.

Tomorrow, we strip away the illusions and confront the structural arithmetic holding our supply chains hostage.

Lock your dials on this platform. The clock is ticking.

 

Continue Reading

Trending