Connect with us

Customs

Comptroller Nnadi mourns death of retired customs officer,   DCG Sanusi

—–reminiscences on his encounter with late Customs boss
The eyewitness reporter 
Comptroller Dera Nnadi, the Area Controller of the Seme Command of the Nigeria Customs Service, has expressed a deep sense of loss mixed with grief over the death of DCG (rtd) Umar Sanusi
The retired Customs boss died early hours of Sunday 26th, March 2023,  at a private hospital in Abuja and will be buried according to Islamic rites the same day after Muslim prayer in the Abuja Central Mosque.
However,  in an emotion-laden tribute to the late Customs boss, Nnadi bemoaned the death of Sanusi whom he said he admired and revered as a Customs officer.
Recounting his various encounters with the deceased, Nnadi disclosed that the late Sanusi came across to him as a fine, diligent, compassionate, thorough, and core professional officer who was humane, humble, and highly detribalized, the attributes which Comptroller Nnadi said had a deep impression on him
“It is with a heavy heart that I received the news of the death of DCG Rtd Umar Sanusi.  A gentleman officer and an erudite Nigerian.
“My first encounter with the senior officer was in 2003 or so at the  CGC conference in Calabar Cross River State, where, as an Assistant Comptroller of Customs, he presented a report as the  APM Apapa Command.
“It was not common then to present papers and reports in PowerPoint, but he did. This was not the only remarkable thing he did at the conference.
“The then AC Sanusi was detailed in his report, which was a departure from what others presented.
“He was factual and honest and admitted it where things were wrong in NCS  operations at Apapa Command and highlighted them in writing during his presentation.
“This was shocking to the entire audience as it was rare then for officers to admit that their acts while discharging their duties, were not optimal.
“Some attempt by the moderator to stop him was rebuffed by a lone voice.
“One man and indeed the Boss was that voice. The then  CGC now Gbon Gwom Jos Da Elder Jacob Gyang Buba overruled everybody and urged him to continue and to even say more if he has facts.
“He gave him more time than the allotted 30 minutes. There was a pin-drop silence.
“AC Sanusi earned a place in the Service after that encounter. He also earned my admiration as a young Deputy Superintendent of Customs.
“Our path was to cross again when I was posted to Apapa prior to the commencement of the second phase of the NCS and  NPA port reforms, which coincided in 2006.
” AC Sanusi was the APM and  I was the PRO of the Command.
“The NCS reforms included migration from basic  ASYCUDA to ASYCUDA 2.0, the use of the precursor to PAAR called Risk Assessment Report RAR, the introduction of e- Payment regime and the introduction of Non-Intrusive Cargo examination- Scanners all with Apapa Port as the pilot Command.
“On the other hand and going on simultaneously was the port concession which saw NPA handing over to private sector owners of the port facilities.
“The challenges then were enormous, but we survived all through DCG Sanusi’s diligence with the then Comptroller Rasheed Owolabi Taiwo.
“It was a milestone for me and indeed for the senior officer then AC Sanusi. I learnt a lot from him.
“Yet another remarkable encounter with DCG Sanusi was at the NCS Headquarters when he was appointed ACG Headquarters.
“I had gone to greet him and pay homage when he did the “unthinkable” at least in my little understanding of life then.
“After taking my compliments, he offered me a seat and of course, I refused to seat in his presence as an Assistant Comptroller out of courtesy.
“He said ‘Nnadi, I have observed that we are not close anymore and I think this is an opportunity for me to address it’. I was shocked and said it wasn’t so.
“What he said next shocked me. He said ” I know I offended you but I  want to use this opportunity to apologise and request that you work closely with me. As ACG HQ, I will need you around me since you are in SR&P”.
“I  responded that I did not know that he offended me being his junior who respect and admire him. He said I should never mind.
“He offered me a gift, stepped out, shook my hands and gave me a hug.
“I left his office confused, overwhelmed with emotions and thereafter held in greater esteem and awe. His loss is a personal one to me.
“Farewell DCG Umar Sanusi. NCS and indeed Nigeria lost a gem” Nnadi sobbed.
The deceased, Sanusi, who retired in 2019 as DCG, Human Resources Department, died after a brief illness in the early hours of Sunday, 26th March 2023.
Sanusi was earlier appointed Assistant Comptroller General Customs (ACG), Headquarters by Col. Hameed Ali (rtd), in 2015 before he was promoted to DCG in 2018.
Announcing his death, the Public Relations Officer, PTML command of the Service, SC Yakubu Muhammed said
“With heavy heart,i notify us of the demise of DCG AU Sanusi(Rtd).

“He passed on about an hour ago at a private hospital in Abuja. The Janaza prayers hold after the Zuhr prayers (1 pm) at the National Mosque, Abuja In Shaa Allah,”

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Customs

Customs suspends training of recruits over dispute with Federal Character Commission on recruitment exercise 

Gloria Odion, Maritme Reporter 
The Nigeria Customs Service (NCS) has temporarily suspended training activities at its two training colleges following concerns raised by the Federal Character Commission (FCC) over the ongoing recruitment exercise.
The suspension is intended to allow both institutions to undertake further consultations and resolve issues arising from the recruitment process through dialogue and mutual understanding.
The decision followed engagements between the Commission and a delegation of the NCS, during which both institutions reaffirmed their commitment to resolving the concerns through constructive dialogue, sustained engagement and institutional collaboration.
The Comptroller-General of Customs, Bashir Adewale Adeniyi,reiterated the Service’s commitment to maintaining cordial relations with relevant government institutions and addressing concerns in the overall interest of the nation.
Adeniyi acknowledged the constitutional responsibility of the FCC in promoting national unity, fairness and equitable representation in public service appointments.
He stressed the importance of the Commission’s mandate in advancing inclusiveness and ensuring adherence to the principles of federal character in public sector recruitment and appointments.
The Customs Service also reaffirmed its longstanding relationship with the Commission, expressing confidence that ongoing consultations would provide an effective platform for addressing the issues raised and arriving at a mutually acceptable resolution.
Both institutions reiterated their commitment to promoting fairness, national cohesion and effective public service delivery.
The NCS further restated its commitment, under the leadership of the Comptroller-General and his management team, to upholding accountability, transparency and institutional responsibility.
It assured that it would continue to engage relevant government institutions, strengthen inter-agency cooperation and pursue resolutions that reinforce public confidence, promote national unity and support the effective discharge of its statutory responsibilities.
Continue Reading

Customs

Customs reviews B’Odogwu system in Lisbon, targets faster cargo clearance, higher revenue

Gloria Odion Maritime Reporter 
The Nigeria Customs Service (NCS) has concluded a three-day strategic review of its B’Odogwu Unified Customs Management System in Lisbon, Portugal, with a series of resolutions designed to address operational bottlenecks, accelerate cargo clearance, strengthen cargo tracking and optimise revenue collection.
The workshop, held from November 9 to 11, 2026, at the Corinthia Hotel, brought together senior NCS management and officers, Trade Modernisation Project Limited (TMPL) and CB-XP representatives to assess the system’s performance, identify implementation gaps and develop a roadmap for improving its efficiency.
The review focused on consolidating the gains recorded since the introduction of B’Odogwu while addressing technical and operational challenges affecting its deployment across Customs commands.
Speaking at the opening ceremony on November 9, the Deputy Comptroller-General of Customs in charge of ICT Modernisation, Oluyomi Adebakin, commended the Comptroller-General of Customs, Adewale Adeniyi, for his commitment to technological innovation and capacity development within the Service.
The Managing Director of TMPL, Jummai Umar-Ajijola, who represented the company’s Chairman, Saleh Ahmadu, disclosed that the B’Odogwu platform had attracted the attention of the African Continental Free Trade Area (AfCFTA) Secretariat, reflecting its growing relevance to regional trade facilitation.
She added that improvements to the system had contributed to increased revenue generation and strengthened the Customs revenue ecosystem.
Umar-Ajijola said the workshop provided an opportunity to develop a concrete roadmap for consolidating the achievements recorded over the past three years and identifying priorities for the next phase of the project.
“We are to work to find a concrete plan not only to consolidate but to build a change roadmap going forward at the assessment of the three years so far,” she said.
She also commended the NCS Public Relations Unit for its consistent communication and reporting on the project.
Among the major resolutions reached was the upgrading of the Electronic Cargo Tracking System (ECTS), alongside measures to strengthen bond and transit management, automate Customs Procedure Code approvals and streamline the processing of import, export, re-importation and transit declarations.
Participants also agreed on the need to harmonise Customs Procedure Code nomenclature to promote uniformity, operational efficiency and accountability across Customs operations.
On cargo monitoring, the workshop considered plans to integrate the upgraded ECTS with B’Odogwu and replace 200 obsolete electronic seals with 2,000 newly procured units.
The proposed improvements also include individual container tracking for applicable transit declarations, enhanced bond registration and validation processes, and tighter monitoring of bonded cargo movements to curb diversion and other transit-related infractions.
In another major area of deliberation, participants examined the proposed integration of B’Odogwu with the Nigeria Export Processing Zones Authority (NEPZA), as well as improvements to the Transire Processing System.
The workshop further identified the need to upgrade the platform’s reporting dashboard, search filters and Harmonised System (HS) Code search functionality to make information retrieval and transaction monitoring more efficient.
Other proposed enhancements include providing access to previously processed declarations, improving the monitoring of procedure code applications, introducing system alerts to reduce processing errors and incorporating Time Release Study requirements into the platform.
The resolutions also addressed operational procedures, with participants reviewing Standard Operating Procedures (SOPs) for Bond Management, Transire Commands and Export Commands to ensure conformity with the Nigeria Customs Service Act 2023.
To strengthen project governance and prevent unauthorised system changes, the workshop resolved that all requests for modifications to B’Odogwu must undergo review and receive approval from the Officer in Charge of the Project Management Office before deployment.
Participants also reviewed the project’s communication plan, emphasising the importance of stronger engagement with stakeholders to ensure effective implementation and wider acceptance of the system.
At the closing ceremony on November 11, the Deputy Comptroller-General of Customs in charge of Finance, Administration and Technical Services (FATS), Kikelomo Adeola, stressed the importance of translating the workshop’s resolutions into measurable operational improvements.
The closing session featured a presentation by the Customs Area Controller, Comptroller Murtala Mu’azu, while the Chairman of CB-XP, Edward Bowen, delivered goodwill remarks.
To ensure effective implementation, specific responsibilities were assigned to relevant NCS and TMPL units, with the expectation that the agreed technical and operational interventions would translate into improved system performance.
The Lisbon review marks another phase in the NCS’s efforts to strengthen digital Customs administration through B’Odogwu, with the ultimate objective of reducing cargo clearance delays, improving transparency, tightening cargo monitoring and enhancing revenue optimisation.
Continue Reading

Customs

Cole congratulates Anani on promotion, welcomes Ekok as new Tin Can Customs Controller

Gloria Odion, Maritme Reporter

The Chairman of the Tin Can Island Chapter of the Association of Nigeria Licensed Customs Agents (ANLCA), Prince Olawale Cole, has congratulated the immediate past Customs Area Controller of Tin Can Island Port Command, Assistant Comptroller-General (ACG) Joseph Anani, on his promotion to the rank of Assistant Comptroller-General, while welcoming Deputy Comptroller Emmanuel Agbor Ekok as the new Acting Customs Area Controller of the command.

Cole described Anani’s elevation as a well-deserved recognition of his dedication, professionalism and contributions to the Nigeria Customs Service (NCS), noting that his tenure at Tin Can Island was characterised by cordial stakeholder relations and constructive engagement with port operators.

In a congratulatory message, the ANLCA chairman commended the newly promoted ACG for his accessible leadership style, openness to dialogue and willingness to engage licensed customs agents on issues affecting port operations and trade facilitation.

He said Anani’s commitment to stakeholder collaboration helped foster mutual understanding and cooperation between Customs officers and licensed customs agents, creating an enabling atmosphere for addressing operational challenges at the port.

Cole expressed confidence that Anani’s wealth of experience and professional expertise would continue to benefit the Nigeria Customs Service and the wider maritime industry in his new capacity.

He wished the former Tin Can Customs Controller success in his elevated position, describing his promotion as a source of pride to stakeholders who had worked with him during his tenure at the command.

The ANLCA chairman also congratulated Deputy Comptroller Emmanuel Agbor Ekok on his assumption of office as Acting Customs Area Controller of Tin Can Island Port Command, expressing optimism that his administration would consolidate existing stakeholder relationships and further improve operational efficiency.

Cole assured the new Acting Controller of the chapter’s readiness to sustain a productive working relationship with the command, particularly in advancing efficient port operations, facilitating legitimate trade and addressing challenges confronting customs agents and other port stakeholders.

He emphasised that effective collaboration between the Nigeria Customs Service and licensed customs agents remained essential to achieving faster cargo clearance, improving revenue generation and creating a more business-friendly port environment.

Cole urged Ekok to sustain regular consultations with stakeholders and maintain an open-door policy, especially in resolving operational concerns relating to cargo examination, customs valuation, documentation and clearance procedures.

He expressed the hope that the new Acting Controller would build on the achievements of his predecessor while introducing initiatives to strengthen stakeholder confidence, promote transparency and improve service delivery.

Cole reaffirmed the Tin Can Island Chapter of ANLCA’s commitment to supporting policies and initiatives that promote professionalism, trade facilitation, efficient port operations and the overall development of Nigeria’s maritime sector.

Continue Reading

Trending